1/4 mile times?
I am curious what kind of 1/4 or 1/8 mile track times you guys have. I know none of us are super fast but just for fun I would like to see your times, mods and what your truck weighs. Just give as much info as possible.
I have not been to the track but using the Scan Gauges performance tracker which does 1/4 mile time I am right around a 15.93 at 84 mph. I have only done about 4 runs so I am still tinkering with the process. Not to mention I am doing this on public roads so I need to be careful! The truck weighs about 7900-8000 pounds. Mods are intake, exhaust, Junk Diablo chip (thats changing soon!), 17 degree HPOP, AD split shots, 6.0 IC So let see what you have |
I have a 99 but it went 10.13 on the 1/8th. Middle of july with temps about 95 or so.
|
Originally Posted by Lovin7.3
(Post 6550671)
I have a 99 but it went 10.13 on the 1/8th. Middle of july with temps about 95 or so.
|
here's mine from a year ago..
mods on the truck were 10k mod, intake, stock downpipe into an empty cat box and 5" stacks, LUK single mass, and an FPR shim. i think that was it... I figured out later on that i was letting out of it a little too early. LoL. first time to drag race so i didn't know that i was supposed to wait for the light to change colors before letting off. haven't been back since we did injectors but that will come soon REACTION ----- 1.2572 60 FT ----- 2.6141 330 FT ----- 7.4001 1/8 ET ----- 11.3914 1/8 MPH ----- 61.63 1000 ET ----- 14.8305 1000 MPH ----- NONE 1/4 ET ----- 17.7240 1/4 MPH ----- 78.08 |
my 1/4 mile is just over 17 with a 5speed and the truck weighs in at 6,800#
|
just ran on saturday..
R/T- .540 60'- 2.190 330'- 6.189 1/8- 9.361 MPH- 70.97 1000'- 12.640 1/4- 15.272 MPH- 84.85 info in sig.. went scrappin and weighed my truck in at 6560# with me and 1 empty tank and the other at 1/2 full. |
Gob did you see that SD at the end of the night with the 108mph pass take out that Dudge that was running so quick in the day?
|
the one with the cummins conversion? i was at the beer garden after i raced a few times so i might have missed a few runs :-drink
ps.. there was a single cab that i seen staged but missed his run. had twin oil, hybrids, ceramic topped pistons, custom cam, etc.. lots of goodies... black and charcoal two tone |
Not sure it was a grey crew cab truck. Didn't see it up close only from the stands. I had just gotten there when the '72 CAT F-truck was staging and didn't get to see that run that must have been a blast!
|
i ran a 17.0 with a 3.?? 60 foot. horrible, the truck can do better but i cant launch it hard. i need traction bars to keep the rear from coming out from under it.
14.7k icp 4.7k eot 1705 sc 6.0 ic 4 inch ex (at the time) 6 inch lift- 35 inch tires 6637 intake chj shift kit i think thats all of 'em |
Tow, that was him!! he had a powerstroke nation sticker on there. yup ran 12.3 all day. did you run yours?
|
15.2 in No.3 on nitrous. My 60ft was 3.2 cuz I kept spinning the tires off the line. I'm certain there was a mid 14 in it. Haven't gotten Rockee to the track yet.
|
Nah maybe next year this was my first time there and I didn't know I could. I car, strike that, truck-pooled with my buddy from work.
|
I got 16.20 @ 81MPH on my AE Speed Tracer. Never been to the track with it.
F350, Auto trans, 8000+ pounds, CC, long bed, 4x4, 4:10 axles Mods: All most none! New CPS (It really made a difference) DP 4" no kitty, see though muffler No Chip (I think, never looked) 6637 filter Gauges (Do they add any performance) :) |
Originally Posted by Cuda_jim
(Post 6552097)
Mods: All most none! Times all look good guys Keep them coming. Joe you don't need bars you just need to get that T-case fixed!! Whats the hold up! 4WD launches are much better! |
All times are GMT -5. The time now is 01:37 AM. |
© 2024 MH Sub I, LLC dba Internet Brands