'73-'79 For Sale/Trade/Wanted
As seen in the other older truck forums and elsewhere:
--For sale: You must post in the Marketplace first. Then, post a link to that ad here with whatever information you want to provide. If you can't post in the Marketplace, you can't post a for-sale here --Wanted or free: A Marketplace ad is desirable but not required. Post the link here if you have it. --NO commercial ads --Please PM a mod to have the ad removed once the item is sold or found --Ads will be removed periodically --Please use PMs for dealing --On topic sale/wanted related posts only please! |
For Sale/Wanted added to '73-'79 forum. Please see the rules above!
Thanks! |
Looking for a disc front axle for my
highboy. Low pinion 44HD preferred but would consider a HP44 or 60. Located in VA. Also looking for: -White/red tailgate. -white driver fender -Tan visors, dash pad, headliner -good 73-77 steering wheel -black glove box door -misc odds n ends…. -16” steel rim -1973 bed liner (not newer or older, one year fits only) |
Waterpump Pulley
Needing a waterpump pulley for my 78 150 Ranger with the 4.9l. 2 or 3 groove
|
Originally Posted by 78150ranger
(Post 20072555)
Needing a waterpump pulley for my 78 150 Ranger with the 4.9l. 2 or 3 groove
https://cimg6.ibsrv.net/gimg/www.for...926285f89.jpeg |
Originally Posted by jackietreehorn
(Post 20099394)
I almost want it and want to attempt to run a single longer v belt. Boy sure if it’s possible though. I need 2 grooves to run my power steering. |
Box/bed wanted
Update: Finders fees paid if you know of a box or have one available, and it results in me getting my hands on one! Still looking for this box as of 10/10/22
Looking for a long box and tailgate for my 76 f150. I'm located in Wisconsin, but I will drive up to 8 hours to pick up whatever you have. I have a flatbed on mine that is in good shape I could trade you if you wanted, or I can buy the bed outright if not. https://cimg7.ibsrv.net/gimg/www.for...38680b72c1.jpg |
ISO 300 straight six engine perches for a 1978 F250. Located in Iowa, but willing to pay shipping costs.
|
Originally Posted by Bootlegger's Deluxe
(Post 20134688)
ISO 300 straight six engine perches for a 1978 F250. Located in Iowa, but willing to pay shipping costs.
https://cimg0.ibsrv.net/gimg/www.for...063afc3d9.jpeg https://cimg3.ibsrv.net/gimg/www.for...1508d40d4.jpeg https://cimg7.ibsrv.net/gimg/www.for...4fecdbe8d.jpeg |
Originally Posted by 78150ranger
(Post 20099678)
I almost want it and want to attempt to run a single longer v belt. Boy sure if it’s possible though. I need 2 grooves to run my power steering.
https://cimg8.ibsrv.net/gimg/www.for...fc23e43e3.jpeg https://cimg9.ibsrv.net/gimg/www.for...812422200.jpeg https://cimg0.ibsrv.net/gimg/www.for...2609dcf1b.jpeg |
WHO WANTS A 460?
71 block 460
& a set of dove heads and a scj intake that go with it and yes the casting # is D0oe! those aren't free See ad in Marketplace: https://www.ford-trucks.com/forums/market/1679164 |
Can you tell me more about the intake ?
|
It's a stock ford SCJ intake cast iron holley pattern very large runners. It will makes gobs of torque bolted to dove heads! do not ever port match the heads unless going in a car,I did it ONCE! and that 429 wouldn't pull your finger out of a hot pail of lard! until it hit about 6k in rpm's. felpro makes a set of gaskets for them
|
ISO/Wanted: 73-79 F350 Crew Cab Dually Frame/Chassis
I am in need of a F350 Crew Cab Dually frame or chassis. The wheelbase should be 166.5 inches.
Will travel for a fair priced deal. Thanks |
I am looking for a Hood in decent shape for a 73-79. I have a 77 but no worries if it is a 78-9 style. Just looking for something with no rot or too many dents.
Also a bracket for a type 9 style mirror, if it is the whole mirror assembly that is okay as well. I'm in North Jersey, MOD NOTE: mirror bracket found and posts removed. |
All times are GMT -5. The time now is 07:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands