300 i6 vaccuum leaks
 

I have been out of town for several weeks only to find my vaccuum lines have practically disintegrated. Below is the picture of whats left. 2 of the lines im pretty sure about, but where it tees i am lost
https://cimg0.ibsrv.net/gimg/www.for...374900ebc7.jpg

would need to know the year of the tuck to help figure it out. I replaced each line on my 93 one at a time with new rubber hose. I don't recognize the black fitting. Maybe someone with a better idea will pop in.

Vaccuum
 

Its a 96 300cid i6. I cant find any other lines that would run to that T. Im scratching my head atm trying to fond it on diagrams and everything else

I have a 96 300 also. But my hood is frozen shut at the moment. When it warms up, I'll try to grab a photo of where that T connects to.

Vaccuum
 

Hell yea, thanks warren!!

If warren doesn't, I'll get ya after class around 3.

Us '96 300 rejects gotta stick together

Heeelllp
 

Yea I still meed help with this vaccuum issue. Mainly because i work so mucu and dont have time.

Here ya go. I found the "Tee" on my truck.
https://cimg0.ibsrv.net/gimg/www.for...939950f39d.jpg
right hand arrow goes to manifold, up arrow goes to the spot in next photo and left arrow goes to spot in last photo.

https://cimg8.ibsrv.net/gimg/www.for...5b91ec5be0.jpg
center arrow goes here, blower box for AC/heater,right hand side near intake.
https://cimg7.ibsrv.net/gimg/www.for...2eaffeee45.jpg
left arrow goes here. from front of truck,lefthand side below hinge,above blower motor goes inside the same loom as the vacuum line for the heater door flap control.(I think that is what it is,regardless it goes to a canister by the hood hinge)

hope it helps.

Thanks a bunch. But is there any way to get a pic from a zoomed out perspective? Kinda like the one i sent or maybe birds eye? I know im a pain in the ass, but it would help a lot

This is the best i can do.
https://cimg7.ibsrv.net/gimg/www.for...ccc5c8e04e.jpg
Location of the "tee"
https://cimg3.ibsrv.net/gimg/www.for...d778a60334.jpg
location of the center line from picture 2 in previous post
https://cimg7.ibsrv.net/gimg/www.for...a193976fb9.jpg
Location of where the left hand tube goes to in the loom from 3rd picture in previous post.
both pictures of #2 is literally right next to the intake on the big black box. Both pictures #3 are right on top of the blower motor. The line comes out of that loom and goes over to the "tee"

Thanks man. Im going to take a look on sunday since its the only day i dont work until dark.

Did you by chance get your issue fixed?

Not yet. I ended up having to go out of town that Sunday. Im going to try this weekend though- thanks for the help. I will post with results

Actually.. Is there a way i can bybass the ac vac line? I do not currently have ac