300 i6 vaccuum leaks - Ford Truck Enthusiasts Forums

Notices
1987 - 1996 F150 & Larger F-Series Trucks 1987 - 1996 Ford F-150, F-250, F-350 and larger pickups - including the 1997 heavy-duty F250/F350+ trucks

300 i6 vaccuum leaks

 
  #1  
Old 01-20-2019, 02:37 PM
Deadpool12
Deadpool12 is offline
New User
Thread Starter
Join Date: Sep 2018
Posts: 16
Deadpool12 is starting off with a positive reputation.
300 i6 vaccuum leaks

I have been out of town for several weeks only to find my vaccuum lines have practically disintegrated. Below is the picture of whats left. 2 of the lines im pretty sure about, but where it tees i am lost
 
  #2  
Old 01-20-2019, 04:59 PM
ZombieF150's Avatar
ZombieF150
ZombieF150 is offline
Senior User
Join Date: Sep 2018
Location: AR
Posts: 280
ZombieF150 is starting off with a positive reputation.
would need to know the year of the tuck to help figure it out. I replaced each line on my 93 one at a time with new rubber hose. I don't recognize the black fitting. Maybe someone with a better idea will pop in.
 
  #3  
Old 01-21-2019, 09:34 AM
Deadpool12
Deadpool12 is offline
New User
Thread Starter
Join Date: Sep 2018
Posts: 16
Deadpool12 is starting off with a positive reputation.
Vaccuum

Its a 96 300cid i6. I cant find any other lines that would run to that T. Im scratching my head atm trying to fond it on diagrams and everything else
 
  #4  
Old 01-21-2019, 09:42 PM
warren561
warren561 is offline
Senior User
Join Date: Dec 2012
Location: 01867
Posts: 346
warren561 is starting off with a positive reputation.
I have a 96 300 also. But my hood is frozen shut at the moment. When it warms up, I'll try to grab a photo of where that T connects to.
 
  #5  
Old 01-22-2019, 12:29 PM
Deadpool12
Deadpool12 is offline
New User
Thread Starter
Join Date: Sep 2018
Posts: 16
Deadpool12 is starting off with a positive reputation.
Vaccuum

Hell yea, thanks warren!!
 
  #6  
Old 01-22-2019, 12:45 PM
evan_nugget's Avatar
evan_nugget
evan_nugget is offline
Senior User
Join Date: Mar 2017
Location: Manassas, VA or JMU
Posts: 382
evan_nugget is gaining momentum as a positive member of FTE.evan_nugget is gaining momentum as a positive member of FTE.
If warren doesn't, I'll get ya after class around 3.

Us '96 300 rejects gotta stick together
 
  #7  
Old 01-25-2019, 06:40 AM
Deadpool12
Deadpool12 is offline
New User
Thread Starter
Join Date: Sep 2018
Posts: 16
Deadpool12 is starting off with a positive reputation.
Heeelllp

Yea I still meed help with this vaccuum issue. Mainly because i work so mucu and dont have time.
 
  #8  
Old 01-25-2019, 11:38 AM
ZombieF150's Avatar
ZombieF150
ZombieF150 is offline
Senior User
Join Date: Sep 2018
Location: AR
Posts: 280
ZombieF150 is starting off with a positive reputation.
Here ya go. I found the "Tee" on my truck.

right hand arrow goes to manifold, up arrow goes to the spot in next photo and left arrow goes to spot in last photo.


center arrow goes here, blower box for AC/heater,right hand side near intake.

left arrow goes here. from front of truck,lefthand side below hinge,above blower motor goes inside the same loom as the vacuum line for the heater door flap control.(I think that is what it is,regardless it goes to a canister by the hood hinge)

hope it helps.
 
  #9  
Old 01-25-2019, 07:33 PM
Deadpool12
Deadpool12 is offline
New User
Thread Starter
Join Date: Sep 2018
Posts: 16
Deadpool12 is starting off with a positive reputation.
Thanks a bunch. But is there any way to get a pic from a zoomed out perspective? Kinda like the one i sent or maybe birds eye? I know im a pain in the ***, but it would help a lot
 
  #10  
Old 01-25-2019, 08:03 PM
ZombieF150's Avatar
ZombieF150
ZombieF150 is offline
Senior User
Join Date: Sep 2018
Location: AR
Posts: 280
ZombieF150 is starting off with a positive reputation.
This is the best i can do.

Location of the "tee"

location of the center line from picture 2 in previous post

Location of where the left hand tube goes to in the loom from 3rd picture in previous post.
both pictures of #2 is literally right next to the intake on the big black box. Both pictures #3 are right on top of the blower motor. The line comes out of that loom and goes over to the "tee"
 
  #11  
Old 01-25-2019, 08:13 PM
Deadpool12
Deadpool12 is offline
New User
Thread Starter
Join Date: Sep 2018
Posts: 16
Deadpool12 is starting off with a positive reputation.
Thanks man. Im going to take a look on sunday since its the only day i dont work until dark.
 
  #12  
Old 01-28-2019, 09:47 AM
ZombieF150's Avatar
ZombieF150
ZombieF150 is offline
Senior User
Join Date: Sep 2018
Location: AR
Posts: 280
ZombieF150 is starting off with a positive reputation.
Originally Posted by Deadpool12 View Post
Thanks man. Im going to take a look on sunday since its the only day i dont work until dark.
Did you by chance get your issue fixed?
 
  #13  
Old 01-31-2019, 04:00 PM
Deadpool12
Deadpool12 is offline
New User
Thread Starter
Join Date: Sep 2018
Posts: 16
Deadpool12 is starting off with a positive reputation.
Not yet. I ended up having to go out of town that Sunday. Im going to try this weekend though- thanks for the help. I will post with results
 
  #14  
Old 01-31-2019, 04:04 PM
Deadpool12
Deadpool12 is offline
New User
Thread Starter
Join Date: Sep 2018
Posts: 16
Deadpool12 is starting off with a positive reputation.
Actually.. Is there a way i can bybass the ac vac line? I do not currently have ac
 

Thread Tools
Search this Thread

Contact Us About Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

© 2018 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.