NEED Ford 216 exhaust manifold
Need good condition exhaust manifold for 1952 F-1 216 OHV 6 CYL engine-- any pictures, price-- Thanks
|
Need a H Code 226 head
Picked up a 51 F1, the guy pulled the head because the motor was seized from sitting. He had since misplaced the head, radiator and fan, so looking for parts. Plan to eventually put a 8BA in it, but for now wanna get the old 226 running to move it around while I work on it.
|
Spare tire carrier
I need a spare tire carrier and both hanger bolts for my 1950 F1. Thanks.
|
Looking for two original front 48-52 F1 brake drums.
JB |
WANT--1952 F-1 exhaust manifold
Looking for good condition exhaust manifold for F-1 -- OHV 6 cylinder
|
Looking for a stock (no dents) drive shaft for my 1954 F100 3speed. I am in Carpinteria, California. Tim
|
https://cimg2.ibsrv.net/gimg/www.for...a75d75db47.jpg
I have one of these RH taillight brackets for sale, $50.00 plus shipping in a small flat rate box. These fit an F4 and larger truck, also 1938-47 1 1/2 and 2 ton trucks. Thanks, Mark |
54 f100 6 cylinder
I have a 54 6 cylinder motor with a 3 speed trans. out of a f100, I don't need (Motor/tranz) i took it out a few years ago and has been under wraps outside and need to get rid of it . before this winter if I get no takers it will have to go to scrap. come and get it please Im in NJ . I do need a 54 f100 grill if you want to swap . email me at " ooraider.tp@gmail.com "
|
1952 F3 For Sale
Hey gents, a surgery for my wife is forcing this sale. 1952 F3 restomod in progress. I'll try to capture everything. Currently has a 1964 Y-block 292 that I rebuilt and is about 90% complete less the oil dipstick tube and headers. Has not been started since rebuild. I bought it with a 272 y-block in it so I do not have the flatty. Front disc conversion done for 5x5.5 lug pattern. I have the toyota power steering conversion from the 53-56 kit with all of the yota stuff and original gear box with the truck but the shaft was cut to use the original shaft with the toyota conversion. S10 manual transmission conversion done but will need to complete the tach/speedo. Dana 60 rear end with all new components and I believe 3.25 gear ratio. I have another gear set that came out of it as well. All sheet metal and original crashbox tranny and rear end is with the truck minus a couple of badges. The truck was complete when I got it and was "drivable" in theory so I have everything that I took off of the truck still. The bed still has original wood under the metal but it's shot. The bed itself has some cancer and stake pockets are in rough shape. The bumper has been modified at some point. Cab floor is solid but step rails are rough per usual. No title but will come with a bill of sale. Located near Wilmington, NC. Asking $3,000 but it's negotiable to a degree.
https://cimg3.ibsrv.net/gimg/www.for...7b77d735c4.jpg https://cimg6.ibsrv.net/gimg/www.for...558a983d70.jpg https://cimg0.ibsrv.net/gimg/www.for...218d2819f9.jpg https://cimg3.ibsrv.net/gimg/www.for...9099057b1a.jpg https://cimg6.ibsrv.net/gimg/www.for...298292e9a7.jpg https://cimg8.ibsrv.net/gimg/www.for...679c7e952d.jpg https://cimg1.ibsrv.net/gimg/www.for...5c580a5d60.jpg https://cimg2.ibsrv.net/gimg/www.for...a163e71eb7.jpg https://cimg3.ibsrv.net/gimg/www.for...3ec925793c.jpg https://cimg6.ibsrv.net/gimg/www.for...3cd2a45f8a.jpg https://cimg8.ibsrv.net/gimg/www.for...067a4f8dfd.jpg https://cimg0.ibsrv.net/gimg/www.for...9724323e6d.jpg https://cimg1.ibsrv.net/gimg/www.for...d72052103a.jpg https://cimg2.ibsrv.net/gimg/www.for...0e898ebfb3.jpg https://cimg3.ibsrv.net/gimg/www.for...a5fa72b1b0.jpg |
Needed: 1949 Ford COE hood latch 602-317-4713
https://cimg0.ibsrv.net/gimg/www.for...5bf4a4e281.jpg
Needed: 1949 Ford COE hood latch https://cimg1.ibsrv.net/gimg/www.for...e22df02bf8.jpg Needed: 1949 Ford COE hood latch |
I have a 48-52 F2, F3 8' express bed, a panel rear bumper, as well as quite a few 48-50 F1 parts for sale, will post pictures later this evening. located in South Dakota
|
or trade
OR TRADE FOR A DECENT 54 GRILL NO RUST
Originally Posted by ooraider
(Post 19515006)
https://cimg5.ibsrv.net/gimg/www.for...8597dfe6c0.jpg
no cracks just needs to be cleaned up 125.00 plus shipping or free pickup https://cimg6.ibsrv.net/gimg/www.for...1a078c0aae.jpg needs to be rebuilt 50.00 plus shipping |
Driveshaft
Driveshaft out of a 49 F1. Make an offer. Local pickup only. I'm outside of Buffalo NY
https://cimg6.ibsrv.net/gimg/www.for...b277b4dbc9.jpg |
1949 F1 Rearview Mirror
Driver quality...nice but fog around edges..25.00 plus the ride
https://cimg6.ibsrv.net/gimg/www.for...750c34cd85.jpg https://cimg2.ibsrv.net/gimg/www.for...3244473d07.jpg |
8MTH-7085 B
I have a T98 (Synchronized 4 speed transmission that’s a bolt up swap for flatheads) bearing retainer out of a 1950 Ford F6. I am going a different route with my project and no longer need the retainer and T98. I did weld a hairline crack on the retainer. I will be cleaning up the rust/grease so if interested please PM for updated pictures. Also for sale is the T98 too. Also have a copper core radiator for a 50’ F6 254 if anyone is interested - does not leak.
PM for more details https://cimg6.ibsrv.net/gimg/www.for...17bb7b569.jpeg https://cimg8.ibsrv.net/gimg/www.for...e0f5ab042.jpeg |
All times are GMT -5. The time now is 06:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands