So I have to do something that I never wanted to do... and that's sell my project truck. I recently upgraded into a new home, but downgraded in garage space. So I no longer have the space to keep this project.

Purchased the truck three years and began work on it. Stripped it all the way to the bare frame where I sanded it all down and began repainting.

As it is now, it's just a rolling frame (body is off the frame) with all new paint, suspension, brakes, brake lines, tires and rims. (Tires and rims cost $2,000 alone). The engine is a 352 and it was cleaned up from the inside out, added a pro comp cam shaft and aluminum Edelbrock intake, then repainted. Also has a granny 4 speed. (Truck and tranny ran fine before tear down, no issues at all).

The cab was rusted too bad on the roof, so I bought another 65' from Utah and used the cab off it. Went ahead and kept the bed and hood too as they were much straighter. Put new cab corners, cab mounts, floor pans, and kick panels on the cab, which removed any leftover rust. Cleaned it up, primed it then rhino lined it.

I have a massive stack of receipts of all the parts I purchased along the way, and have a total of 600 hours logged in this truck. Lots of new parts ready to be installed. For the most part, the truck is all here, just needs someone who has the time and space to finish what I started. $4,000. And please, I know exactly how much money I have in this thing, and it's a lot more than 4K, so dont waste my time low balling me. The pictures are in random order, but it's just to show some of the work done. I have many many more pictures. But the one with the green truck all together was the day I bought it and began tearing it down, and the featured picture is how it is now. (Again, the truck is not in one piece, the cab and bed are off the frame). Thanks for your time!

P.S. the VIN isn't the real one. I will put the real one when I get home and look at the title.