"candlestick" corner lights???
Elder User
Joined: Jan 2007
Posts: 746
Likes: 1
From: Minnesota
I am sure there are only 2 wires coming out of those bumper mounted lights, correct? if so, what colors? my guess is black and white. I would think you should be able to just splice into the connections on the inside of the fender for the corner marker lights. Typically in 12v automtive applications, the black is ground, and the red, white, or yellow are the 12v power. If you want those candle stick lights to blink with the front blinkers, then I suggest tapping into that circuit to draw power to supply them.
Thread Starter
|
Elder User
Joined: Feb 2009
Posts: 555
Likes: 0
I have the left one wired, its on with the running lights on, and blinks with the turn signal, the right one on the other hand, doesnt turn on with the running lights, however, it does blink with the turn signal. thats why I'm stumped on this one.
Thread
Thread Starter
Forum
Replies
Last Post
reamer
Escape & Escape Hybrid
0
Feb 22, 2017 09:01 AM
Little General
EcoBoost (all engine sizes)
0
Mar 29, 2016 04:56 PM
