Busted ignition switch

Reply Subscribe

Thread Tools

Search this Thread

Sep 14, 2010 | 10:18 PM

jodaddy

Thread Starter

Senior User

Joined: Feb 2006

Posts: 132

Likes: 0

Busted ignition switch

I am thinking about buying a 74 f250 with a 390. I went to check it out but the ignition switch was on the floorboard in pieces. all the wires are there just dangling. Any body know what wires should be jumpered in order to hot wire this thing. I know how to turn the starter over at the solenoid but that won't do me much good if there is no power to the coil or fuse block. thanks in advance, Joe

Sep 15, 2010 | 08:33 AM

mudder460

Posting Guru

Joined: Nov 2006

Posts: 1,231

Likes: 0

From: Riverview, FL

If it was me, I would go to a salvage yard and cut one out of a truck and splice it in. It has been a looooong time since I had to hot wire anything so I am no help there.

Reply Subscribe