mustang II front end control arms
Thread Starter
|
New User
Joined: Feb 2003
Posts: 1
Likes: 0
mustang II front end control arms
i'm looking for the specs for mustang II upper & lower control arms. intend to fabricate tubular stainless steel ones to replace the stock ones on my '34 ford pickup.
any help i can get would be appreciated.
any help i can get would be appreciated.
Moderator
Joined: Nov 2001
Posts: 2,643
Likes: 35
From: Orange County, CA
mustang II front end control arms
If you have the stamped steel ones then you should be able to just go off of what those specs are. But you know, I think places like Heidts and Fatman Fabrications may have stainless steel tubular arms ready to bolt on.
