engine mount/bellhousing mounts
Thread Starter
|
New User
Joined: Aug 2008
Posts: 5
Likes: 0
engine mount/bellhousing mounts
Does anybody know where I can get the rear engine/ transmission mounts for 4X4 63 ford sidestep. All the part store can only get mounts for the 2 wheel drive. A brief description of the lowers, is they are like donuts with metal sleeve in them and steel washer on the outside.
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 785
From: Simi Valley, CA
C1TT6A061C .. Lower Insulator (Rubber Mount).
C3TZ6068D .. Upper Insulator
Fits: 1961/64 F100/250 4WD / 1961/64 F500/750 / 1961/64 N500/750.
Dennis Carpenter has reproduced both of these mounts, and has 100's in stock: 704-786-8139
The sleeves: C1TT6A027C (Ford calls them spacers) and washers were sold separate, so they do not come with the insulators.
Dennis Carpenter also has the sleeves, which tend to rust out.
