Dead Truck No Clue =\
Thread Starter
|
Posting Guru
Joined: Jun 2005
Posts: 1,065
Likes: 0
From: Oshkosh Wisconsin
Dead Truck No Clue =\
Hey guys, I posted up in 95 f150 section... i figured maybe this section might know more. I have the truck in my sig. My fuel pump isn't turning on so i replaced it tonight and got it all connected back together and still nothing! There is voltage to the connector near the tank on the pink and black wire. The inertia switch isn't on i already checked that. I tried to jump the relay and i hear it clicking under the hood.
Is there any thing else I can try? I'm getting very frustrated!
Is there any thing else I can try? I'm getting very frustrated!
Laughing Gas
Joined: Dec 2003
Posts: 900
Likes: 3
My Chilton's manual is showing the pink/black wire as the 12v feed to the pump. If you are getting 12v there, it looks like the relay and inertia switch are good, since the power has to pass through them to get to the pump. The ground is the orange wire which mates to a black wire before going to a chassis ground.
Thread
Thread Starter
Forum
Replies
Last Post
G2IC_Wraith
1983 - 2012 Ranger & B-Series
19
Aug 23, 2016 04:09 PM
harrysnyder
1967 - 1972 F-100 & Larger F-Series Trucks
2
Apr 14, 2011 05:41 AM
