Gas cap
Thread Starter
|
Freshman User
Joined: Jan 2005
Posts: 43
Likes: 0
Gas cap
Hi,
due to my flat bed, I have merely 2" between the opening of my filler neck and the intake tube of my gas tank.
On bumps and while cornering I loose considerable amounts of fuel trought the gas cap.
I will reroute the vent tube of my filler neck to a higher location, but I also need a non-vented gas cap, preferably locking if possible.
Where can I find a non-vented gas cap that matches the filler neck?????
It does not need to be chromed, nor label Ford,anyone that fit's will do.
Any suggestions welcome.
Gab.
due to my flat bed, I have merely 2" between the opening of my filler neck and the intake tube of my gas tank.
On bumps and while cornering I loose considerable amounts of fuel trought the gas cap.
I will reroute the vent tube of my filler neck to a higher location, but I also need a non-vented gas cap, preferably locking if possible.
Where can I find a non-vented gas cap that matches the filler neck?????
It does not need to be chromed, nor label Ford,anyone that fit's will do.
Any suggestions welcome.
Gab.
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 785
From: Simi Valley, CA
Originally Posted by Mich 41
Hi,due to my flat bed, I have merely 2" between the opening of my filler neck and the intake tube of my gas tank.
On bumps and while cornering I loose considerable amounts of fuel trought the gas cap. I will reroute the vent tube of my filler neck to a higher location, but I also need a non-vented gas cap, preferably locking if possible.
Where can I find a non-vented gas cap that matches the filler neck?????
It does not need to be chromed, nor label Ford,anyone that fit's will do.
Any suggestions welcome.Gab.
On bumps and while cornering I loose considerable amounts of fuel trought the gas cap. I will reroute the vent tube of my filler neck to a higher location, but I also need a non-vented gas cap, preferably locking if possible.
Where can I find a non-vented gas cap that matches the filler neck?????
It does not need to be chromed, nor label Ford,anyone that fit's will do.
Any suggestions welcome.Gab.
This cap is not available from Ford any longer, but NAPA can cross the original Motorcraft number over to the brand of cap they sell.
Last edited by NumberDummy; Jun 16, 2007 at 12:54 PM.
Thread
Thread Starter
Forum
Replies
Last Post
53fatfndr
1948 - 1956 F1, F100 & Larger F-Series Trucks
13
Jun 4, 2015 09:17 PM
iwals
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
26
Jan 25, 2012 01:04 PM
Aftrmidnite
General NON-Automotive Conversation
7
May 18, 2010 09:43 PM
GreatNorthWoods
1948 - 1956 F1, F100 & Larger F-Series Trucks
13
May 29, 2007 08:57 AM
