wiring diagrams for a '60
Thread Starter
|
Senior User
Joined: Sep 2004
Posts: 253
Likes: 0
From: Duncan, OK
wiring diagrams for a '60
Does anyone know of an alternate source of wiring diagrams other than the my shop manual? Possibly an overview like what's found on late model trucks. I am tracing several wires and need to see the big picture ( I am from Missouri..it's the Show-Me state!) Any help appreciated!!
Ryan
Ryan
New User
Joined: Jan 2008
Posts: 0
Likes: 24
This site should help you some.
http://www.centechwire.com/catalog/fords/k40f.shtml
http://www.centechwire.com/
http://www.centechwire.com/catalog/fords/k40f.shtml
http://www.centechwire.com/
Thread Starter
|
Senior User
Joined: Sep 2004
Posts: 253
Likes: 0
From: Duncan, OK
Mil1ion, I appreciate the site info, I am without the Benjamins right now! I am really just researching the swith from points to DuraSparkII with the addition of a newer ('77) 300-6 for my '60. From what I have found, I am assuming that there are reallly only 2 wires to follow to the ignition switch..the red for constant on and the white for the "start" to assist with the timing for starting. Everything else is as it comes( module with blue plug) on the 300-6.
Another dumb question: the part of the coil marked "tach"....is there where one would attach the wire for their tachometer? I just want to be sure. Can you forsee any other problems with what I am doing? Thanks for all the input so far, Mil1ion! (VIN id, more dizzy questions) :-)
Ryan
Another dumb question: the part of the coil marked "tach"....is there where one would attach the wire for their tachometer? I just want to be sure. Can you forsee any other problems with what I am doing? Thanks for all the input so far, Mil1ion! (VIN id, more dizzy questions) :-)
Ryan
