alittle40 Here's some Pic's
Thread Starter
|
Trailering
Joined: May 2001
Posts: 24
Likes: 0
From: Central FL
alittle40 Here's some Pic's
[font size="1" color="#FF0000"]LAST EDITED ON 08-Oct-01 AT 10:59 PM (EST)[/font][p]https://www.ford-trucks.com/dcforum/User_files/steve41/3bc264522f2853ec.jpg
Sorry - meant for f100drivr
- we haven't gotten to putting the body back together yet, but here are some pictures of when we were taking it apart. This is the best pic I have as far as the hood hinge goes.
The gauge panel face is 10 1/2 by 4.
Don't know how far the box is from the lines on the cab, but the pic is pretty good.
As far as the fenders/grill, I'm gonna put the fenders on first and then fit the grill in. Mine should fit with no problem since my entire frame is original.
As for the cab mounts, they are made of wood and with the angles and added peices, it is real hard to measure. I plan on building new ones out of steel (in about a month or so). If interested, could send you the original mounts once I get the new ones done.
Sorry - meant for f100drivr
- we haven't gotten to putting the body back together yet, but here are some pictures of when we were taking it apart. This is the best pic I have as far as the hood hinge goes.
The gauge panel face is 10 1/2 by 4.
Don't know how far the box is from the lines on the cab, but the pic is pretty good.
As far as the fenders/grill, I'm gonna put the fenders on first and then fit the grill in. Mine should fit with no problem since my entire frame is original.
As for the cab mounts, they are made of wood and with the angles and added peices, it is real hard to measure. I plan on building new ones out of steel (in about a month or so). If interested, could send you the original mounts once I get the new ones done.
