Question about 30s-47 1, 1.5, & 2 ton rear axles
Thread Starter
|
Junior User
Joined: Sep 2002
Posts: 89
Likes: 0
From: Currently, Portsmouth, RI
Question about 30s-47 1, 1.5, & 2 ton rear axles
Hello All,
Do any of you have info or know where I can find some regarding the "bell" style rear ends that FoMoCo used on teh big trucks in these years? What I am talking about is the one used on the trucks that did not come with the optional 2-speed rear, and was the LARGE version of the same type that was used in passenger cars and pick-ups. By "bell" style I am talking about the ones that the axle tubes bolted to a center section that looked much like a "quick change" rear without the rear gears and plate.
The specific information I am looking for concerns strength, parts availability, and gear ratios. If any of you know anything about these rears, please respond. . . Thanks
Do any of you have info or know where I can find some regarding the "bell" style rear ends that FoMoCo used on teh big trucks in these years? What I am talking about is the one used on the trucks that did not come with the optional 2-speed rear, and was the LARGE version of the same type that was used in passenger cars and pick-ups. By "bell" style I am talking about the ones that the axle tubes bolted to a center section that looked much like a "quick change" rear without the rear gears and plate.
The specific information I am looking for concerns strength, parts availability, and gear ratios. If any of you know anything about these rears, please respond. . . Thanks
Thread
Thread Starter
Forum
Replies
Last Post
Osiyo59
1961 - 1966 F-100 & Larger F-Series Trucks
14
Aug 13, 2012 10:43 AM
wanderso
1967 - 1972 F-100 & Larger F-Series Trucks
20
Mar 31, 2005 05:47 AM
jaimalade
Clutch, Transmission, Differential, Axle & Transfer Case
4
Sep 26, 2002 07:18 PM
jaimalade
Clutch, Transmission, Differential, Axle & Transfer Case
1
Sep 24, 2002 08:44 AM
