Header Gaskets
Moderator
Joined: Dec 2001
Posts: 22,436
Likes: 17
From: Louisville,Ky.
Header Gaskets
I've always had better luck out of Mr. Gasket Header gaskets. They are softer when new and form to the imperfections in the headers and heads alot better than those old metal style gaskets. Once they get hot a couple of times, they become hard and stay sealed. Just a note, no matter which gaskets you use, always retorque the bolts after it gets up to normal operating temp.( Be careful, They do burn you easily if touched) Then after they cool back down again. Repeat this process a couple of times until the bolts no longer to feel loose. Then I would check them about once a month just to keep them tight snd from getting any leaks.
Jimmy
Jimmy
