Dana Front Axle Questions
Thread Starter
|
Freshman User
Joined: Jan 2005
Posts: 39
Likes: 0
From: North Idaho
Is it Dana 44 or Dana 60
I have a 1975 F250 High Boy. Trying to determin what axle is in the front. I suspect it is a dana 44. But looking at break down picture of the dana 60. It possibly could be it too. It has the closed Knuckle. I have tried to cross the numbers on the axles, with no luck finding any thing that will reference the numbers off axles.
Front axle: 603395-1 with a marked ratio of 4 09
Rear axle: 603382-11 with a marked ratio of 4 10
Front axle: 603395-1 with a marked ratio of 4 09
Rear axle: 603382-11 with a marked ratio of 4 10
Last edited by ATrippy67; Jan 31, 2005 at 06:56 PM.
Postmaster
Joined: Dec 2002
Posts: 3,959
Likes: 9
From: USA
Alright, I did some research for ya. According to the .pdf file on the Dana Expert website, www2.dana.com/expert, for '67-'78 Ford axle applications:
603395-1 is a Dana 44 front axle in a '73.5-'75 F250 with 4.09 ratio, open differential, and part time transfer case.
603382-11 is a Dana 60 rear axle in a '73-'75 F250 with 4.10 ratio and open differential.
603395-1 is a Dana 44 front axle in a '73.5-'75 F250 with 4.09 ratio, open differential, and part time transfer case.
603382-11 is a Dana 60 rear axle in a '73-'75 F250 with 4.10 ratio and open differential.
