Missfire with NO Codes. 5.0 coyote
Thread Starter
|
5th Wheeling
Joined: Nov 2003
Posts: 44
Likes: 0
From: Woodbury CT
Missfire with NO Codes. 5.0 coyote
I have a 2011 coyote swap. The other day it seemed to backfire from time to time and then had a missfire. The code reader says no codes. so its not showing an issue but it is there. It comes and goes. I tried to disconnect one connector at a time for the coil packs and injectors. i thought i found one that made no difference and changed out injector and coil and i still have the missfire. I dont know where else to check. any help is appreciated. I did record the datalog but have no idea what to do with it.
THANKS
THANKS
Thread
Thread Starter
Forum
Replies
Last Post
