Another Crown Vic IFS ?
Thread Starter
|
Tuned
Joined: Mar 2011
Posts: 273
Likes: 6
Another Crown Vic IFS ?
What is the difference between a 56 straight axle width & a Crown Vic? And how to go about narrowing a CV, ? I do have access to a complete machine & fab shop. The front end is almost given to me. What kind of tire sizes can be run
Cross-Country
Joined: Apr 2009
Posts: 84
Likes: 2
From: Holly Springs, NC
If I remember correctly, the CV frontend is 5" wider than a stock frontend. Which pretty much limits you to the late model Mustang type wheels to fit under the fenders. I believe the Crown Vic front end uses an aluminum crossmember which would require it to be welded back together after shortening. The CV is not the best fitting swap but it does seem to get a lot of attention because they are cheap and plentiful. I'm sure a google search will turn up a bunch of stuff. Good luck !
Lead Driver
Joined: Dec 2012
Posts: 9,718
Likes: 823
From: Wentzville, MO
They usually remove the center of the cradle of the CV to shorten it. Then they use a different cars rack and pinion. Send a note to Ed Ritchie (FB) or Dave Held (FB) Owner of Team321 LLC. They both are a wealth of information and both sell narrowed or Narrowing kits for the Crown Vic IFS (independent front suspension). Keep us posted on your decision and progress.
Thread
Thread Starter
Forum
Replies
Last Post
DJS463
1948 - 1956 F1, F100 & Larger F-Series Trucks
11
Mar 24, 2021 08:48 AM
kmolleson
1948 - 1956 F1, F100 & Larger F-Series Trucks
2
Jan 21, 2018 07:02 PM
Blue50F-1
1948 - 1956 F1, F100 & Larger F-Series Trucks
17
Jul 4, 2016 01:41 PM
Hunter99004
1948 - 1956 F1, F100 & Larger F-Series Trucks
37
Apr 14, 2016 10:02 PM
willowbilly3
1957 - 1960 F100 & Larger F-Series Trucks
2
Sep 16, 2012 01:46 PM
