2001 Front Spindle knuckles
Thread Starter
|
Junior User
Joined: Nov 2017
Posts: 90
Likes: 0
From: Central Illinois
2001 Front Spindle knuckles
Okay , had a new motor put in, got the truck back, I admit the truck sat for a little bit. Now I have a grinding noise of sorts coming out of the driver's side front. It flip on the fly 4x4. Will a manual spindle hub work inplace of flip on the fly hub/spindle?
Lead Driver
Joined: Mar 2013
Posts: 7,460
Likes: 85
From: Kent Station, WA
Is everything moving properly? Brake slide plins free? Rotors clean and rust free? Uni-bearing have and wobble?
Start with those and if nothing remove the uni-bearing and check the needle bearing that rides on the stub shaft.
Check the link below to see how to remove and replace.
2004 F250 Super Duty 4x4
Start with those and if nothing remove the uni-bearing and check the needle bearing that rides on the stub shaft.
Check the link below to see how to remove and replace.
2004 F250 Super Duty 4x4
Thread
Thread Starter
Forum
Replies
Last Post
burning coal
1999 - 2016 Super Duty
3
Aug 2, 2010 10:11 PM
