Lowering shocks
Thread Starter
|
Lead Driver
Joined: Nov 2000
Posts: 6,628
Likes: 345
From: Albuquerque
Lowering shocks
My 77 is dropped 3"/5" and I have air shocks on the back in case I need to carry a load. I'd like to find dropped shocks for the front. Picture is before drop and new rims.
Any suggestions?
Any suggestions?
Cargo Master
Joined: Oct 2010
Posts: 2,674
Likes: 16
From: Ideeho
If you are trying to figure out what will fit, you will need to measure between the upper and lower shock mounting points......both at full droop and full rebound......If you want to try and find something without doing that.......I'd suggest Googling and contacting DJM.......they have been lowering Dents for years.....They can probably come up with what you need
Fleet Owner
Joined: Dec 2009
Posts: 20,678
Likes: 82
From: NorCal
If lowered with DJM beams, then front "lowering shocks" are not required. Drop beams just move the spindle (axle) centerline up. The travel is still the same - generally between 2.0 and 2.5 inches.
Just opt for better front shocks like Bilstein HDs.
Just opt for better front shocks like Bilstein HDs.
Thread
Thread Starter
Forum
Replies
Last Post
3"5"dropeedf150
1987 - 1996 F150 & Larger F-Series Trucks
2
May 25, 2011 04:25 PM
tschmitt
1961 - 1966 F-100 & Larger F-Series Trucks
2
Oct 23, 2009 06:20 PM
antunez13
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
1
Jan 19, 2008 09:04 PM
