99 F150 Vaccum Redo
Thread Starter
|
Junior User
Joined: Jul 2016
Posts: 57
Likes: 0
99 F150 Vaccum Redo
Planning to replace every vacuum hose under the hood next week, anyone know what sizes I should get?
Once I do it, I'll do a write up with measurements and sizes needed in exact measurements for cuts.
I was thinking of 50' of 5/32" ID
https://www.amazon.com/Gates-27042-W...5%3A2470955011
5' of 3.5mm ID
https://www.amazon.com/HPS-HTSVH35-B...5%3A2470955011
And 5' of 6mm ID
https://www.amazon.com/HPS-HTSVH6-RE...5%3A2470955011
Am I missing any sizes?
All this in hopes to cure my rough idle since I've already replaced the MAF, IAT, IAC, EGR, and Fuel Filter. Just bought it so I was gonna do those anyway.
Once I do it, I'll do a write up with measurements and sizes needed in exact measurements for cuts.
I was thinking of 50' of 5/32" ID
https://www.amazon.com/Gates-27042-W...5%3A2470955011
5' of 3.5mm ID
https://www.amazon.com/HPS-HTSVH35-B...5%3A2470955011
And 5' of 6mm ID
https://www.amazon.com/HPS-HTSVH6-RE...5%3A2470955011
Am I missing any sizes?
All this in hopes to cure my rough idle since I've already replaced the MAF, IAT, IAC, EGR, and Fuel Filter. Just bought it so I was gonna do those anyway.
Thread
Thread Starter
Forum
Replies
Last Post
lovemy150's
1999 - 2003 7.3L Power Stroke Diesel
28
Feb 5, 2007 12:14 PM
stutterstan
Explorer, Sport Trac, Mountaineer & Aviator
3
Jan 30, 2005 03:09 PM
