O2 sensor removal help (1982/351W)
Thread Starter
|
Junior User
Joined: Sep 2002
Posts: 60
Likes: 0
From: San Diego USA
O2 sensor removal help (1982/351W)
OK. There must be a trick to this that I can't see. The O2 sensor (1982 351W) is in such a tight space that I barely got the socket onto it. It seems like I need to remove some other part in order to get in there and get it out. Of course the Haynes manual shows the year that has the sensor right next to the starter - no help there.
Anyone have some advice so I can save at least some of the skin on my knuckles and forearms?
Anyone have some advice so I can save at least some of the skin on my knuckles and forearms?
