Can you run this D5TZ number?
Thread Starter
|
Elder User
Joined: Apr 2001
Posts: 997
Likes: 0
From: texarkana, tx
Can you run this D5TZ number?
Howdy! Have access to Ford part number parts manual?
I was hoping two D5TZ-3A360-A would work on my '74 F-100. I am replacing the bushings and the rods with the threads are pitted badly; if I'm going to go to the pain and suffering to do this right (in 92 degree Georgia heat), might as well get these new also...
Thanks...
I was hoping two D5TZ-3A360-A would work on my '74 F-100. I am replacing the bushings and the rods with the threads are pitted badly; if I'm going to go to the pain and suffering to do this right (in 92 degree Georgia heat), might as well get these new also...
Thanks...
Posting Guru
Joined: Mar 2003
Posts: 1,253
Likes: 2
From: spartanburg, SC
Can you run this D5TZ number?
its a '75 part number
D5TZ-3A360-A
D5= year ,T= truck
still don't know what you're talking about
do you still want to see that yard or is it too hot
will bring your truck
why don't you put one of those (look down) in your truck
D5TZ-3A360-A
D5= year ,T= truck
still don't know what you're talking about
do you still want to see that yard or is it too hot
will bring your truck
why don't you put one of those (look down) in your truck
Last edited by F150daniel; Jul 9, 2003 at 09:38 AM.
Thread Starter
|
Elder User
Joined: Apr 2001
Posts: 997
Likes: 0
From: texarkana, tx
Can you run this D5TZ number?
F150daniel ~
Howdy neighbor in South Carolina!! I think I better lay off getting a bed for a few months - just dumped $800+ into restoring the front end to "like new" condition. The bed is going to have to wait, friend....plus I think I'm about to be laid off....but at least I can drive safely to the "next job". Pix updates on the front end rebuild to be posted soon.....
Thanks for checking on the part number.
PS --- yes, that'd be nice in my Ford Falcon...
Howdy neighbor in South Carolina!! I think I better lay off getting a bed for a few months - just dumped $800+ into restoring the front end to "like new" condition. The bed is going to have to wait, friend....plus I think I'm about to be laid off....but at least I can drive safely to the "next job". Pix updates on the front end rebuild to be posted soon.....
Thanks for checking on the part number.
PS --- yes, that'd be nice in my Ford Falcon...
