Front Ride Height (Electric Parameter) - 2000 Expedition AWD 5.4L Air Suspension

Reply Subscribe

Thread Tools

Search this Thread

Jun 19, 2013 | 04:15 PM

ewstrand

Thread Starter

Freshman User

Joined: Dec 2004

Posts: 46

Likes: 0

Front Ride Height (Electric Parameter) - 2000 Expedition AWD 5.4L Air Suspension

Hi,
So i know how to adjust the front ride height what i need to figure out is where to get a tool that will allow me to clear front ride height and save the new one once i have adjusted the torsion bolt. I have AutoEnginuity with the ford enhancements but i don't see the options to do this under any of the systems in either the commands window or the system self test tab.

Is my only choice to go to ford to get this done or is there some other way to do this such as somewhere i can rent / borrow the tool for cheap.

Thanks

Jun 20, 2013 | 01:40 PM

pdqford

Logistics Pro

Joined: Jan 2001

Posts: 3,740

Likes: 37

From: Central NYS

Quote:

Originally Posted by ewstrand

Hi,
a tool that will allow me to clear front ride height and save the new one once i have adjusted the torsion bolt. I have AutoEnginuity

Interesting - AE told me that there scan tool could not talk to the Navigator air suspension module, but could talk to the Expedition air suspension module - something about the Navigator used an unusual module. Never could actually get to the bottom of their claim.

But if I were you, I'd get AE Tech Service on the line and see if their scan tool with the Ford Enhancement can clear and store front ride height information.

Don't forget to vent the front shocks before you set the torsion bars.