Under hood firewall wiring on stock 52 F1

Reply Subscribe

Thread Tools

Search this Thread

Apr 2, 2013 | 04:15 PM

tractormanbill

Thread Starter

tractorman

Joined: Oct 2011

Posts: 709

Likes: 4

From: San Antonio, Texas

Under hood firewall wiring on stock 52 F1

Looking for picture of under hood firewall and inner finder panel stock wiring along with stock wire clamps on my 52 F1. Also which hole does the emerg. brake enter the firewall, the 1" hole on the angle part?

Next time I am going to take pictures of even the dust on the project before I tear it down!
Thanks,
Tractorman Bill

Apr 2, 2013 | 11:39 PM

51PanelMan

Lead Driver

Joined: Dec 2004

Posts: 7,669

Likes: 13

From: San Jose, CA

Look through this link, 1952 Ford Panel Photos by modelking1 | Photobucket. It contains pictures that may be helpful to you.

Apr 3, 2013 | 09:23 AM

oscajo

Senior User

Joined: Sep 2012

Posts: 222

Likes: 0

From: Jacksonville

Pics from 52 F1

Hope these help. The original motor and trans. were in truck when I purchased so I assume wiring was correct.

Sincerely

Oscar

Flickr: Please wait...@@AMEPARAM@@http://farm9.staticflickr.com/8525/8616746482_a868bd3bbe_m.jpg@@AMEPARAM@@8616746482@@AMEPARAM@@a868bd3bbe

Flickr: Please wait...@@AMEPARAM@@http://farm9.staticflickr.com/8246/8615641775_be096165b0_m.jpg@@AMEPARAM@@8615641775@@AMEPARAM@@be096165b0

Apr 3, 2013 | 09:25 AM

ALBUQ F-1

Fleet Owner

Joined: Jul 2004

Posts: 27,296

Likes: 1,059

From: NM

There was a change in '51 to route the e-brake cable thru an angled "hole" between the plates around the steering column and the floorboard. Earlier style was to go thru a hole in the toe-board on the passenger side, as I recall.

Apr 3, 2013 | 07:05 PM

mlandrum51F1

Junior User

Joined: Jul 2012

Posts: 74

Likes: 0

From: Dallas

I have used this photo gallery, along with diagrams I could find for guidance in rebuilding mine. It might be helpful.

Specialty Auto Investments | 1951 Ford F1 Deluxe 5 Star Extra Pickup

Mark