F700 w cummins 5.9 Ignition wiring
Thread Starter
|
New User
Joined: Mar 2012
Posts: 1
Likes: 0
F700 w cummins 5.9 Ignition wiring
Hey guys, first time poster here....
I am changing my 94-95 F700 from a key ignition to pushbutton starter mainly because the previous owner butchered the wiring in the column, and the key barely works anyways... I have some hot wires, and some cold, and figured out the flasher wires, but ]cant figure out which are the system "on" and "acc" wires....can anyone help? it has the 5 on the floor manual tranny.
THANKS!
I am changing my 94-95 F700 from a key ignition to pushbutton starter mainly because the previous owner butchered the wiring in the column, and the key barely works anyways... I have some hot wires, and some cold, and figured out the flasher wires, but ]cant figure out which are the system "on" and "acc" wires....can anyone help? it has the 5 on the floor manual tranny.
THANKS!
Senior User
Joined: Feb 2010
Posts: 290
Likes: 2
From: Seattle Washington
On the early 90's trucks, the key was just a linkage back to the ignition switch that was mounted further down the column.
So, the ACC and IGN wiring would be down under the dash, on the column.. If its like the early 90's trucks.
So, the ACC and IGN wiring would be down under the dash, on the column.. If its like the early 90's trucks.
Thread
Thread Starter
Forum
Replies
Last Post
81f100stepside
1987 - 1996 F150 & Larger F-Series Trucks
17
Mar 25, 2022 06:48 PM
squirrel64
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
17
Dec 9, 2013 07:59 PM
jasonbridges
Electrical Systems/Wiring
2
Jul 24, 2003 02:37 PM
heavy_56
1948 - 1956 F1, F100 & Larger F-Series Trucks
2
Jun 25, 2003 05:59 AM
