Clutch slave has no pressure
Thread Starter
|
New User
Joined: Jul 2011
Posts: 3
Likes: 0
Clutch slave has no pressure
ok,, trans-new clutch is back together with new master and slave cylinder, but there is no pressure on the hydraulics. What are some trouble shooting tips to find the problem? (95 Ranger)
Fleet Mechanic
Joined: Feb 2007
Posts: 1,716
Likes: 0
From: Boston, MA
did you bench bleed the new MC before installing it and then did you gravity bleed the slave after connecting the MC to the slave?
