Wire Assembly - Engine Control Sensor
Thread Starter
|
Elder User
Joined: Dec 2007
Posts: 784
Likes: 1
From: White Rock BC Canaduh
Wire Assembly - Engine Control Sensor
Can anyone confirm that the following part:
"Wire Assembly - Engine Control Sensor" part# 2C3Z-9D930-BA is the correct harness needed to replace the complete wiring with the plugs for coils and fuel injectors for a 2002 6.8?
Also,,, if this is the correct item is it a reasonably easy RE and RE without too much hassle? I haven't taken a close look yet at were the main connection is for this harness on my truck (it seems to buried like everything else on these V10s) so I'm hoping someone might be able to provide some information on this project for me.
Thanks,
Rick...
"Wire Assembly - Engine Control Sensor" part# 2C3Z-9D930-BA is the correct harness needed to replace the complete wiring with the plugs for coils and fuel injectors for a 2002 6.8?
Also,,, if this is the correct item is it a reasonably easy RE and RE without too much hassle? I haven't taken a close look yet at were the main connection is for this harness on my truck (it seems to buried like everything else on these V10s) so I'm hoping someone might be able to provide some information on this project for me.
Thanks,
Rick...
