239 help
Thread Starter
|
New User
Joined: Nov 2009
Posts: 11
Likes: 0
239 help
hey guys , i just recently scored a 54- 239 for 75 bucks. i bought it for the stock exhaust manifolds and the crossover pipe for my 58 f100. after i got those off i took it completley down to nothin.. 2 pistons were seized. Is it even worth a complete rebuild or not?..... My second question is my 58 with a 292 4 speed plus granny runs fantastic but i'm not comfortable takin it down the highway cause its redlining at 55 mph.. what rear end gear would you guys recommend for highway cruisin plus some overall pep?..
thanks a bunch
thanks a bunch
Cargo Master
Joined: Apr 2003
Posts: 2,389
Likes: 58
But do not think of scrapping the 239! Someone will need it or some parts from it. Seized pistons do not mean it can't be rebuilt. All 8 were seized in my 292 but only one sleeve was required.
I have a 3.70 rear with 225/70-15 tires. 3000 rpm is nearly 60mph.
I have a 3.70 rear with 225/70-15 tires. 3000 rpm is nearly 60mph.
Postmaster
Joined: Jul 2003
Posts: 2,688
Likes: 4
From: Southern Oregon
For the pep check out your dist. thoroughly and if possible have a local run it on a Sun Distrbutor Machine. A lot of the Y dist.s on the road need attention.
Do you have a Holley 2300 carb or Autolite 2100? If it is an Autolite, a change to one with larger venturi's would get you going a little better without too much cost. I'd suggest a 1.08 venturi carb with number 47 jets. Jeep, Y, and SBF owners also are looking so prices for rebuilds on ebay aare up in the range of 150 now.
Do you have a Holley 2300 carb or Autolite 2100? If it is an Autolite, a change to one with larger venturi's would get you going a little better without too much cost. I'd suggest a 1.08 venturi carb with number 47 jets. Jeep, Y, and SBF owners also are looking so prices for rebuilds on ebay aare up in the range of 150 now.
More Turbo
Joined: Mar 2004
Posts: 714
Likes: 78
From: Salem
I second, actually third, the motion to not scrap the 239. I'm a good example of some one that might purchase it - I have four in my garage!
A good place to list it is with the 54 Ford Club - 54ford.com There are many 54 sedan owners of 6 cylinder engines that like to drop the 239 in under the hood.
A good place to list it is with the 54 Ford Club - 54ford.com There are many 54 sedan owners of 6 cylinder engines that like to drop the 239 in under the hood.
Trending Topics
Postmaster
Joined: Jan 2009
Posts: 4,584
Likes: 3
From: Chesapeake, Va.
I second, actually third, the motion to not scrap the 239. I'm a good example of some one that might purchase it - I have four in my garage!
A good place to list it is with the 54 Ford Club - 54ford.com There are many 54 sedan owners of 6 cylinder engines that like to drop the 239 in under the hood.
A good place to list it is with the 54 Ford Club - 54ford.com There are many 54 sedan owners of 6 cylinder engines that like to drop the 239 in under the hood.
I had a '54 and a better engine to drop in would be the 292 or a Lincoln 360 if you don't mind a little work.
However a little 239 will get up and go with the '54 Mercury Carter 4 barrel on it.
Been there, done that.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Thread
Thread Starter
Forum
Replies
Last Post
BlueOvalfan85
Y-Block V8 (239, 272, 292, 312, 317, 341, 368)
10
Mar 26, 2013 08:25 PM
Fordys54F100
Y-Block V8 (239, 272, 292, 312, 317, 341, 368)
34
Jul 4, 2004 06:47 PM
