Flooring?
Thread Starter
|
Junior User
Joined: Sep 2009
Posts: 74
Likes: 0
Flooring?
when i got my truck the carpet was all gnarly and stuff so i removed it and since have been driving around with a bare metal floor. my main question is, what should i use for flooring?
i am considering getting a quart or two of that roll on bed liner stuff, and doing a bed liner on the floor.
http://www.jcwhitney.com/COMPLETE_READY-TO-USE_BRUSH-ON_BED_LINER_KIT?ID=12;0;510001314;0;100002;Produc tName;1;0;0;0;2000789;0;0
i also found some super thin carpet at shucks for like 13 a roll and would just glue it to the floor.
http://shop.oreillyauto.com/ProductDetail.aspx?MfrCode=SCP&MfrPartNumber=107&C ategoryCode=3028
and the cheapest molded carpet ive been able to find is like $125
im on a really strict budget of about $70, and wanted some opinions about what to do also if ive overlooked anything please let me know!
i am considering getting a quart or two of that roll on bed liner stuff, and doing a bed liner on the floor.
http://www.jcwhitney.com/COMPLETE_READY-TO-USE_BRUSH-ON_BED_LINER_KIT?ID=12;0;510001314;0;100002;Produc tName;1;0;0;0;2000789;0;0
i also found some super thin carpet at shucks for like 13 a roll and would just glue it to the floor.
http://shop.oreillyauto.com/ProductDetail.aspx?MfrCode=SCP&MfrPartNumber=107&C ategoryCode=3028
and the cheapest molded carpet ive been able to find is like $125
im on a really strict budget of about $70, and wanted some opinions about what to do also if ive overlooked anything please let me know!
Cargo Master
Joined: Jan 2008
Posts: 2,219
Likes: 190
From: Colorado Springs
maybe a couple quarts of herculiner. I've used it on a few floorpans with excellent results. but you have to scuff the surface, remove rust, and degrease, and mask off before you roll it on. wal mart should have it.
Junior User
Joined: Sep 2009
Posts: 98
Likes: 0
I'm going with a similar project. I'm going to replace my floor pans totally 1st then go with the Herculiner. From what i read the Hurculiner is the best. Yes you will have to remove the rust. The prep is the most important step. Poor prep and the herculiner won't stay. Not sure of the total cost.
