Vacuum/Reservoir/EGR Question
Thread Starter
|
Freshman User
Joined: Oct 2008
Posts: 48
Likes: 0
Vacuum/Reservoir/EGR Question
95 F150 I6. Throwing 332 code. Replaced melted vacuum line from reservoir to EVR. Replaced metal reservoir with plastic one, replaced EGR valve, position sensor and EVR. Still throwing the code. Here is my question. How do I determine if I am getting vacuum on the line from the reservoir to the EVR? I unplugged the vacuum line from the EGR and put a gauge on the line from the reservoir. I get no vacuum at idle or when I give it throttle. Am I doing something wrong? Thanks for any additional assistance.
G
G
Thread
Thread Starter
Forum
Replies
Last Post
craigdallen
1987 - 1996 F150 & Larger F-Series Trucks
32
Oct 13, 2014 05:28 PM
