keyless entry reprograming
Thread Starter
|
New User
Joined: Apr 2001
Posts: 2
Likes: 0
keyless entry reprograming
I have a 95 ford bronco. Power door locks work, alarm can be set off! None of the functions on either of my remotes will operate. I have replaced batteries and fuses etc., no lock. I have taken down the remote unit from under the dash and can operate the door locks, did this on accident while putting the unit back in the black protector case. What could be the problem and where to look. Could this be a bad relay? There is no visible wires that look bad. I jump started a friends truck and a voltage surge and spark occured. Everything else electrical is just fine and operational. What could have shorted out? Any help would greatly be appreciated!
