Archived PA Buy/Sell/Trade Ads
#301
05-11-2010, 06:08 PM
Join Date: Sep 2006
Location: Across from the neighbors
Posts: 5,181
Likes: 0
Received 1 Like
on
1 Post
I bought running a '90 F350 4x4 Frame/ axles/ 7.3 diesel/auto trans/transfer case/ tilt column/ pedals witht he intent of using it! Reality set in, having our 1st baby due in 3 months, i'm not gonna have time for a swap for a while. Anyone interested? It runs and drives how it is, no body though! asking $1250
#302
05-11-2010, 08:00 PM
I have some stuff I want to get rid off...taking up too much space...
A decent 78-79 hood (I can weld up the FORD holes for you if you want to use it on a 73-77 truck)
A decent 73-79 rad support
An NP435 4 speed 4x4 tranny.
A 73-79 bare 9" housing.
TCI transmission cooler
aluminum 302 / 351 / 300 bellhousing.
plus I may have some other 73-79 odds and ends..
If you can use any of this stuff make an offer before I decide to scrap it in the near future....
A decent 78-79 hood (I can weld up the FORD holes for you if you want to use it on a 73-77 truck)
A decent 73-79 rad support
An NP435 4 speed 4x4 tranny.
A 73-79 bare 9" housing.
TCI transmission cooler
aluminum 302 / 351 / 300 bellhousing.
plus I may have some other 73-79 odds and ends..
If you can use any of this stuff make an offer before I decide to scrap it in the near future....
I ended up scrapping it all so you can remove the ad.
thanks.
#303
05-16-2010, 10:03 PM
77-86 parts
I'm trying to clean up around the garage a lil bit, if you need any parts between 77-86 trucks or broncos, i am in the Altoona Area. I have parts or whole! Just ask me to see if i have what you are looking for!
#304
05-27-2010, 12:00 PM
Freshman User
Join Date: Jan 2009
Location: Verona PA
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Looking for an Offenhauser intake for my 300i-6, if anyone in the area is getting rid of one. Or willing to part with one please PM me. Thanks.
#305
06-25-2010, 09:46 AM
Junior User
Join Date: Jan 2009
Location: Pittsburgh
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
dose anybody have any sort of fender flare? thanks to great pa state law when i got pulled over for a tail light out i also got a ticket for my tires sticking out about 3/4 or an inch.
#308
07-11-2010, 08:36 PM
Posting Guru
FREE!!!! stock exhaust off my 2010 f150 has less then 100 miles on it...would make great pipe to reuse on different truck or what ever you want
if not clamed by july 23 will be scraped since im moving outta state
located in altoona pa
if not clamed by july 23 will be scraped since im moving outta state
located in altoona pa
#309
09-14-2010, 09:05 PM
New member and items FOR SALE 73-79 ford
Hey everyone im new.... owned my 79 f150 for about a year now..... i have many parts for sale
sale: 73-79 parts Rough country lift kit NEW- 351m misc parts - Ford Truck Enthusiasts Forums
and pics of my truck let me know if your around my way.....
sale: 73-79 parts Rough country lift kit NEW- 351m misc parts - Ford Truck Enthusiasts Forums
and pics of my truck let me know if your around my way.....
Last edited by glruff; 09-22-2010 at 04:21 PM.
#310
12-24-2010, 09:37 AM
Senior User
Join Date: Oct 2010
Location: Hellertown,Pa
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
FREE (3) 33"x12.5"x16.5" BFG All-terrains
2 have 3/32nds
1 has 6/32nds
good for spares or rolling truck around
All hold air
Hellertown,Pa 18055
glhs636@rcn.com
2 have 3/32nds
1 has 6/32nds
good for spares or rolling truck around
All hold air
Hellertown,Pa 18055
glhs636@rcn.com
#311
12-24-2010, 10:10 AM
Senior User
Join Date: Oct 2010
Location: Hellertown,Pa
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
#312
03-08-2011, 06:54 PM
Tuned
Join Date: Nov 2002
Location: CENTRAL PA
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
1974 C6 FE trans.
Please ck this ad out on craigslist.
C6 rebuilt
Prob is I knocked a pc out of bell on lh side at a locating hole.
Best offer.
C6 rebuilt
Prob is I knocked a pc out of bell on lh side at a locating hole.
Best offer.
#313
03-23-2011, 12:50 PM
parts.
Here are some leftover parts I have laying around.....
I have a nice 48-50 f-1 grill (no rust, visible dents or damage) I would like $275 for it.
I also have a divorced t-case out of a 68-72 f-250 4x4... I think it is a dana model 24 I would like $90 for it.
1976 early bronco with a SHOT body but it has a good title, disc brake 44 up front, big bearing rear 9", c4 auto, power steering and a running 302 in it. I want $1250 for it.... it would be a good candidate for a fiberglass body.
RARE big block ford c-4 automatic... this is a ford made c4 that bolts to 460 429's and 400's. it only has 50,000 original miles on it and worked great when removed from the original car 3 weeks ago.....it is a perfect setup to put a big block in an early pickup or a 2wd ranger or whatnot. I want to get $250 for it....I have NEVER seen another one and the conversion bellhousings out there for a BBF run over 600.
Plus I have a bunch of other leftover early bronco parts.. if you need something ask....I may have it...or then again I may not!!!
I have a 72 302 that I just flopped out of an early bronco....it is locked up but may be a good core....I will let it go for scrap weight if you need it or the heads off it.
I have a nice 48-50 f-1 grill (no rust, visible dents or damage) I would like $275 for it.
I also have a divorced t-case out of a 68-72 f-250 4x4... I think it is a dana model 24 I would like $90 for it.
1976 early bronco with a SHOT body but it has a good title, disc brake 44 up front, big bearing rear 9", c4 auto, power steering and a running 302 in it. I want $1250 for it.... it would be a good candidate for a fiberglass body.
RARE big block ford c-4 automatic... this is a ford made c4 that bolts to 460 429's and 400's. it only has 50,000 original miles on it and worked great when removed from the original car 3 weeks ago.....it is a perfect setup to put a big block in an early pickup or a 2wd ranger or whatnot. I want to get $250 for it....I have NEVER seen another one and the conversion bellhousings out there for a BBF run over 600.
Plus I have a bunch of other leftover early bronco parts.. if you need something ask....I may have it...or then again I may not!!!
I have a 72 302 that I just flopped out of an early bronco....it is locked up but may be a good core....I will let it go for scrap weight if you need it or the heads off it.
#314
06-12-2011, 07:47 AM
06 F250 CC w/15 MONTH Zero Deductible Ford ESP ExtraCare
REASONABLE OFFERS CONSIDERED AND NEGOTIABLE
2006 Ford F-250 Lariet Crew Cab, Short Bed, 6.0L Diesel, 4x4, A/T, FX4 Package, Tow Package, Plow Package, Upfitter Switches, Running Boards, Two-tone White and Arizona Beige, Power/Heated Leather Seats, Power Slide Rear Window...ORIGINAL OWNER...47,000 ORIGINAL MILES...REASONABLE OFFERS CONSIDERED AND NEGOTIABLE.
INCLUDES remaining 7 YEAR/75,000 MILE Ford ESP ExtraCare Warranty with ZERO DEDUCTIBLE. Warranty valid UNTIL SEPTEMBER 2012 or 75,000 MILES, whichever comes first.
Removable 12v Electric Tailgate Lift with 300 LB capacity also INCLUDED.
ALL SERVICE RECORDS AVAILABLE FROM NEW HOLLAND FORD, PA
Send PM, Email, or CALL 717-291-0349. THANKS FOR YOUR INTEREST.
MLCRI$I$ II (Ernie)
2006 Ford F-250 Lariet Crew Cab, Short Bed, 6.0L Diesel, 4x4, A/T, FX4 Package, Tow Package, Plow Package, Upfitter Switches, Running Boards, Two-tone White and Arizona Beige, Power/Heated Leather Seats, Power Slide Rear Window...ORIGINAL OWNER...47,000 ORIGINAL MILES...REASONABLE OFFERS CONSIDERED AND NEGOTIABLE.
INCLUDES remaining 7 YEAR/75,000 MILE Ford ESP ExtraCare Warranty with ZERO DEDUCTIBLE. Warranty valid UNTIL SEPTEMBER 2012 or 75,000 MILES, whichever comes first.
Removable 12v Electric Tailgate Lift with 300 LB capacity also INCLUDED.
ALL SERVICE RECORDS AVAILABLE FROM NEW HOLLAND FORD, PA
Send PM, Email, or CALL 717-291-0349. THANKS FOR YOUR INTEREST.
MLCRI$I$ II (Ernie)
Last edited by MLCRI$I$ II; 07-29-2011 at 04:49 PM. Reason: PRICE CHANGE
#315
09-02-2011, 08:32 PM
Junior User
Join Date: Jul 2010
Location: Wrightsville, PA
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Hi! I am looking for a 5x7" in dash speaker for my '65 F100. Mounting holes are 4 3/8 oc.
Thanks
Thanks