front end bind?
Thread Starter
|
Senior User
Joined: May 2005
Posts: 128
Likes: 0
From: NEWTOWN, ct
front end bind?
I have been feeling a binding in the front end but ONLY at full steering lock, not at 3/4-to-full lock like when I have the hubs locked. I dont have ESOF and I just replaced my ball joints and hub assemblys 6 months ago so I'm stumped here.
any ideeers?
any ideeers?
FTE Leadership Emeritus
Joined: Sep 2000
Posts: 23,174
Likes: 1,679
From: Stephensville WI
This is usually an indication that your front 4x4 hubs are locked. Mine only binds at full lock when the hubs are locked.
With the hubs unlocked, reach behind the wheel and try to rotate the axle at the U-joint. It should spin free of the wheel on each side.
With the hubs unlocked, reach behind the wheel and try to rotate the axle at the U-joint. It should spin free of the wheel on each side.
