Ohh great , another mod I have to do. Come on already my list is too big already

 

Welcome to the sickness! LOL


Just buy a John Woods or BTS and then the mod isn't necessary!

 

Well at least it is a no cost or low cost depending on fluid loss.

 

did you see my list of stuff to do? trans is the last thing , well the larger turbo maybe the last thing. Is there a last thing?

 

No such thing

 

x2^^^^^^^^

 

Theres never a last thing

 

Lol waiting until after power mods how to pay for a trans isn't good either.

 

Well went out and did this mod tonight been needing to drop the pan anyway to replace the trans control spring now the shifter slides into gear like butter

I seen someone used a 5/64 bit instead of 1/16 so I split the difference and used a #50 bit

Wish I would have known about this mod a while ago it shifts great now

Quick question for those who have done it when you had your valve body off if you tipped up on end back and forth could you hear what sounded to me like a spring sliding back and forth is that normal lol

 

Bump for info on this thread. Looking for the pics of the vb and where to drill....the "sexy lap" pics mentioned on page 1.

TIA!

 

....also a link for the "CURE" that was mentioned within.

Thanks!

 

The cure is out of production.
If pics of VB are needed I have mine.

 

if you don't mind posting them, or linking to them, I would greatly appreciate it! Don't want to re invent the wheel here.

Is there a replacement or upgrade product available today that matches, duplicates or improves on the "cure" ?

Thanks again!

k

 

I still have the cure on the old mule of mine.

 

I still want to do this to my truck but I'm waiting on the future break downs to stop.