hydroboost
Post Fiend
Joined: Nov 2003
Posts: 21,285
Likes: 16
From: Nutter Fort, WV
I looked at hydraboost units four different places, none of them had the rod.
None of them could order the rod either.
The first place I went was Ford, then NAPA, Advance Auto and Autozone.
Then I tried the salvage yards, no luck there either.
I must not be living right.
None of them could order the rod either.
The first place I went was Ford, then NAPA, Advance Auto and Autozone.
Then I tried the salvage yards, no luck there either.
I must not be living right.
Senior User
Joined: Nov 2005
Posts: 125
Likes: 0
From: Tacoma, WA
Originally Posted by whitefordaward
304L or 316L stainless.It wont bend trust me I work with the stuff every day. I have turned axle shafts out of 316L round stock and are still in service to day in my rock crawler
Senior User
Joined: Jan 2007
Posts: 175
Likes: 0
ok ok not cheap buy I do a little better than most only couse I work in a shop that has the tools available to me.but the shafts turned out nice,but I would never put it on the road.I do custom fabrication not machining.
