carb problems
Thread Starter
|
Senior User
Joined: Aug 2006
Posts: 113
Likes: 0
carb problems
I have a 750 vac. sec. holley on my 302 the truck is a 1988 was fuel injected but converted it to carb. The problem Im having with the carb is that when I give it too much gas it will stall and backfire a little, just one pop and then take off, what do i need to adjust or do I need a smaller carb. I changed just about everything on the truck that was hooked up to the computer and installed a new cam and intake. Thanks in advance for any help
