Ok i have a 400 bored 60 over with flat tops with zero deck, stock rods and crank, the heads are 351c's milled .030 dynomax headers 3' exhaust and flowmaster super 40's Oh yeah the cam is 486 lift. max. I was curious if anybody could give me a rough guess on the power. I know the compression ratio is about 11 1/2 to 1 because of the heads and pistons. Stock intake and two barrel carb (aluminum intake has a hole in it needs repaired). any ideas on the power?

 

Where are you going to get fuel for it and what cam is in it?

 

currently running 91 octane with booster in it, as far as the cam goes i dont remeber the exact specs but it is mild for that motor I think a max lift of 486