62 Width
Thread Starter
|
Freshman User
Joined: Jan 2003
Posts: 38
Likes: 0
From: Texas
62 Width
I know I'm on the 48-60 sight, but this is such a friendlier bunch, and I do most of my surfing here since I have a 57. However, I have to go pick my son's 62 up this weekend, and I am worried that it will not fit on my trailer. Soes anyone know, or know where I can find, the width of a 62 F100? I am worried that it will hit the sides of the trailer at the door curves. Any help will be greatly appreciated.
Thanks,
Vern
Thanks,
Vern
Lead Driver
Joined: Oct 1999
Posts: 6,776
Likes: 553
From: Kalispell, MT
Vern, I just went out and measured my '62 unibody. It should be close even if your son's is separate cab/body. I measure a consistent 78" wide across the grill, across the hood above the front fender, rear end across the gate area and across the box above the rear fender ridge.
The sides are pretty much vertical slab sides so it should be the same near the door curve - which is very slight.
Hope this isn't too late to help.
Tim
The sides are pretty much vertical slab sides so it should be the same near the door curve - which is very slight.
Hope this isn't too late to help.
Tim
