Another zero rust?
Thread Starter
|
Junior User
Joined: Mar 2004
Posts: 50
Likes: 0
From: california
Another zero rust?
Can someone give some hints on stirring up zero rust to make sure the solids are mixed up well.
I'm not sure if I should shake it or stir it?
Oh, this is a gallon can.
Thanks Vince
I'm not sure if I should shake it or stir it?
Oh, this is a gallon can.
Thanks Vince
Elder User
Joined: Mar 2003
Posts: 999
Likes: 1
From: Willamette Valley Oregon
<cr>
I hand shake it and then stir with a paint mixing stick. Of course, if it has been setting on a shelf for awhile, it might be an idea to break up the clump in the bottom of the can first.
When working with ZR, you don't have to be very critical.
I hand shake it and then stir with a paint mixing stick. Of course, if it has been setting on a shelf for awhile, it might be an idea to break up the clump in the bottom of the can first.
When working with ZR, you don't have to be very critical.
