code 95
Thread Starter
|
Freshman User
Joined: Jan 2004
Posts: 26
Likes: 0
From: michigan
code 95
code 95 can any one tell me what this means i have a 91 ranger 2.3 5 speed no spark no fuel has plenty of fuel pressure can hear pump have replaced coils, ign module, crank sensor , ign switch truck turns over fine all timing is good pulled codes get 95 ?
Senior User
Joined: Feb 2004
Posts: 412
Likes: 0
From: St. Louis region
Just checked out the technical page on this forum and found that code. Here's the definition for a code 95 - FP CKT OPEN PCM TO ENG GND. I looked the acronyms up in the acronym definition guide and found them all except CKT. My interpretation of it is - Fuel Pump Circuit Open Powertrain Control Module to Engine Ground. If someone with a little more knowledge than me could step in here and help us figure out what this means, it would be greatly appreciated.
