F500 holmes wrecker
#16
I found some which referenced FT heads and manifolds, including one with a picture. 2bbl carb.
https://www.ford-trucks.com/forums/1...l#post20845219
And no doubt I was looking at much the same thing you both were.
The VIN says this truck came with a 330 MD.
What's in it now appears to be a 4bbl FE with typical old age "fixes" etc as noted in post 7.
OP can measure the stroke and shed more light on the whole thing.
https://www.ford-trucks.com/forums/1...l#post20845219
And no doubt I was looking at much the same thing you both were.
The VIN says this truck came with a 330 MD.
What's in it now appears to be a 4bbl FE with typical old age "fixes" etc as noted in post 7.
OP can measure the stroke and shed more light on the whole thing.
The following users liked this post:
Thread
Thread Starter
Forum
Replies
Last Post