Rebuilding 93 4.9L: Can't find the right Woodruff key for Cam
#1
Rebuilding 93 4.9L: Can't find the right Woodruff key for Cam
Lookiing for the right woodruff key for my camshaft on a 1993 f-150 with a straight 6.
I have bought a few none are right.
The measurements appear to be 3/16 thick, 5/16 deep and 5/8 long. I found a 3/16 by 5/8, but it fights tight in the cam, and won't go in (even when "encouraged").
I can not find the answer anywhere.
I have bought a few none are right.
The measurements appear to be 3/16 thick, 5/16 deep and 5/8 long. I found a 3/16 by 5/8, but it fights tight in the cam, and won't go in (even when "encouraged").
I can not find the answer anywhere.
#2
https://www.summitracing.com/parts/dur-fkf-4
Not sure that the part is available individually, but for $11 USD you can get it in a kit.
Not sure that the part is available individually, but for $11 USD you can get it in a kit.
Thread
Thread Starter
Forum
Replies
Last Post
JKessler00
1973 - 1979 F-100 & Larger F-Series Trucks
14
05-29-2017 05:12 PM
Azguy54
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
2
08-21-2004 10:06 PM