Moog leaf spring bushing
Thread Starter
|
Laughing Gas
Joined: May 2009
Posts: 854
Likes: 49
From: Maine
Moog leaf spring bushing
I bought Moog SB349 bushings for the front leaf springs. I was thinking they'd take 9/16" bolts (.567"). But the ID of the bushings is .581" which means I'd have .0185" of slop between the bushing and the new bolt. That seems like too much.
The OEM bushings were about ID = .552" and the bolt was about .543" for .009" of slop.
Thoughts?
Roy
The OEM bushings were about ID = .552" and the bolt was about .543" for .009" of slop.
Thoughts?
Roy
