Need some help

Reply Subscribe

Thread Tools

Search this Thread

Oct 15, 2003 | 01:28 PM

david9862

Thread Starter

New User

Joined: Oct 2003

Posts: 15

Likes: 0

Need some help

I'm in the middle of a 302 to 351W swap in my 89 Bronco and need some help with the smog pump plumbing. Does any one know which way the valves are suppose to be reinstalled. I screwed up and didn't take notes when I took them out. They are the valves that go to the smog pump, heads, and cats.

Thanks

Oct 15, 2003 | 09:55 PM

DW2455

Posting Guru

Joined: Jul 2003

Posts: 1,486

Likes: 0

From: Independence, MO

Have you got a Haynes manual? it may help, they only cost about 12 bucks. DW

Oct 15, 2003 | 10:04 PM

david9862

Thread Starter

New User

Joined: Oct 2003

Posts: 15

Likes: 0

I bought a Chiltons manual but the components in their diagrams dont match the ones on my truck. The diagrams are the same as the one on the online manual. My truck has 2 valves with 3 ports on each not including the 1 for the vacuum line. I think I might have connected them wrong.

Reply Subscribe

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump