whould anyone know where I can get a exhaust inlet pipe for a 50 F5, flat head 6, and the heat riser. I checked with waldrens but they tell me that the F1,2,3 and 4 are different, Thanks

 

The inlet pipe is Ford part number: 7HT-5246-B = 1948/51 F4/F5/F6 226 I-6 (except F5 Parcel Delivery & F5/F6 COE) & 1950/52 F6 254 I-6 (except F6 COE).

No Ford dealer or obsolete parts vendor has any NOS .. There's none on ebay either.
----------------------------------------------------------------------------------------------
The heat riser parts were furnished individually. What parts of the heat riser do you need?

Upper pic = 1948/51 226 I-6: F1(C); F2(D): F3(Y); F4(TL); F5(T); F6(TH) // F3/F5 Parcel Delivery & F5/F6 COE are different (shown in lower pic).

The upper pic shows the same parts for all, but the parts listed in the text section of the catalog may not be the same for all. We'll find out after you give me the basic numbers of the parts.

 

I have a complete unit if anybody is interested. I have a complete 226 the block is cracked but I have all the parts engine was complete and running.

 

thanks for the reply, I need all the heat riser parts as all of mine are rusted off plus 2 of the inlet pipe studs and gasket

 

after the part number 7HC-5246-B what does the letter B stand for, I've also seen the part number 7HC-5246-C

 

(sigh)
7HC-5246-C = 1948/51 F1/F2/F3 226.