List of questions
#16
09-01-2017, 11:20 AM
i sectioned in a set of early 60s econoline round taillights
the contour of the sheet metal is a dead on match for the quarters on the panel
ad as far as i'm concerned they look wayyyyy better than the originals
plus you eliminate the chrome housings which are usually pitted beyond practical repair.
i think if you do a search on here for posts by economan you'll come up with the photos n' see just what they look like.
Mikie
near ottawa canada
58 M-100 panel & 64 econoline p/u
the contour of the sheet metal is a dead on match for the quarters on the panel
ad as far as i'm concerned they look wayyyyy better than the originals
plus you eliminate the chrome housings which are usually pitted beyond practical repair.
i think if you do a search on here for posts by economan you'll come up with the photos n' see just what they look like.
Mikie
near ottawa canada
58 M-100 panel & 64 econoline p/u
#17
09-01-2017, 07:43 PM
Post Fiend
i sectioned in a set of early 60s econoline round taillights
the contour of the sheet metal is a dead on match for the quarters on the panel
ad as far as i'm concerned they look wayyyyy better than the originals
plus you eliminate the chrome housings which are usually pitted beyond practical repair.
i think if you do a search on here for posts by economan you'll come up with the photos n' see just what they look like.
Mikie
near ottawa canada
58 M-100 panel & 64 econoline p/u
the contour of the sheet metal is a dead on match for the quarters on the panel
ad as far as i'm concerned they look wayyyyy better than the originals
plus you eliminate the chrome housings which are usually pitted beyond practical repair.
i think if you do a search on here for posts by economan you'll come up with the photos n' see just what they look like.
Mikie
near ottawa canada
58 M-100 panel & 64 econoline p/u
Thread
Thread Starter
Forum
Replies
Last Post
r_reed
1948 - 1956 F1, F100 & Larger F-Series Trucks
11
08-20-2015 09:56 PM