Leaf spring measuring
Thread Starter
|
Laughing Gas
Joined: Mar 2016
Posts: 757
Likes: 43
From: Cheyenne, Wy
Leaf spring measuring
Hello all, I'm working on an unusual truck. My daughter has a 76 Toyota mini motorhome that she just bought and the rear springs are sagged VERY bad. ( rear bumper about 8" from the ground) We want to upgrade these to some 1/2 ton springs because there are no Toyotas within 100 miles in the jy.
. My question...Should I measure straight from front bolt to rear bolt OR follow the arch of the spring??
Most/some of the trucks on the jy do not have the box on the frame so the arch of the spring would be more wouldn't it. That is why I'm wondering how I should measure.
Thanks for your help.
. My question...Should I measure straight from front bolt to rear bolt OR follow the arch of the spring??
Most/some of the trucks on the jy do not have the box on the frame so the arch of the spring would be more wouldn't it. That is why I'm wondering how I should measure.
Thanks for your help.
SPONSOR
Joined: Sep 2013
Posts: 711
Likes: 6
From: Souderton
Your best bet is to go from the center of the front spring eye and follow the arch down to the center bolt, that will be your first measurement. Then go from the center bolt to the center of the rear spring eye, that will be your second measurement. I'm usually on my shop computer but I'm currently stuck in my house waiting for the snow to stop so I can actually get out of my driveway haha. Otherwise I would have seen what measurements you should be coming up with.
Moderator & parts slinger
Joined: Feb 2007
Posts: 50,193
Likes: 5,793
From: S/W Missouri, Polk county
Thread
Thread Starter
Forum
Replies
Last Post
68murc
1967 - 1972 F-100 & Larger F-Series Trucks
11
Jun 8, 2014 09:09 PM
whitie's
1948 - 1956 F1, F100 & Larger F-Series Trucks
3
Apr 13, 2007 12:43 PM
