TFI Module

Reply Subscribe

Thread Tools

Search this Thread

Dec 9, 2001 | 03:52 PM

mantta

Thread Starter

Posting Guru

Joined: Feb 2001

Posts: 1,728

Likes: 0

From: Keweenaw Bay, MI

TFI Module

Can anyone tell me what size the head of them three bolts are that hold the TFI on the distributor? I see it needs a very thin wall socket but I don't know which size to start grinding on.
Thanks
Mantta

Dec 9, 2001 | 08:37 PM

MrPleasant

Senior User

Joined: Aug 2001

Posts: 100

Likes: 0

TFI Module

Just did it on my '91. 7/32 deep socket.

Dec 9, 2001 | 11:37 PM

yodogfish

New User

Joined: Dec 2001

Posts: 10

Likes: 0

From: Des Moines

TFI Module

I bought a spare at the local auto parts store and got a special tool there at the same time to remove the nuts for about 4 bucks.

Dec 10, 2001 | 04:28 PM

mantta

Thread Starter

Posting Guru

Joined: Feb 2001

Posts: 1,728

Likes: 0

From: Keweenaw Bay, MI

TFI Module

Thanks, I figured it was an odd size.

Dec 11, 2001 | 11:17 AM

MrPleasant

Senior User

Joined: Aug 2001

Posts: 100

Likes: 0

TFI Module

Oh, almost forgot... I did have to remove the distributer to get to the nuts. Be careful to mark the rotor position before you do it so that you can get it back in the correct position and don't screw up the timing.

The socket at Autozone was a little more than a buck.

Dec 11, 2001 | 11:44 AM

mcostnza

Freshman User

Joined: Dec 2001

Posts: 30

Likes: 0

From: Bellingham Whatcom

TFI Module

Reply Subscribe